🧪 NCERT Chemistry · Class 12 · Chapter 2
Electrochemistry
Unit 2: Electrochemistry
Objectives
After studying this Unit, you will be able to · describe an electrochemical cell and differentiate between galvanic and electrolytic cells; · apply Nernst equation for calculating the emf of galvanic cell and define standard potential of the cell; · derive relation between standard potential of the cell, Gibbs energy of cell reaction and its equilibrium constant; · define resistivity , conductivity and molar conductivity of ionic solutions; · differentiate between ionic (electrolytic) and electronic conductivity; · describe the method for measurement of conductivity of electrolytic solutions and calculation of their molar conductivity; · justify the variation of conductivity and molar conductivity of solutions with change in their concentration and
Chemical reactions can be used to produce electrical energy, conversely, electrical energy can be used to carry out chemical reactions that do not proceed spontaneously.
Electrochemistry is the study of production of electricity from energy released during spontaneous chemical reactions and the use of electrical energy to bring about non-spontaneous chemical transformations. The subject is of importance both for theoretical and practical considerations. A large number of metals, sodium hydroxide, chlorine, fluorine and many other chemicals are produced by electrochemical methods. Batteries and fuel cells convert chemical energy into electrical energy and are used on a large scale in various instruments and devices. The reactions carried out electrochemically can be energy efficient and less polluting. Therefore, study of electrochemistry is important for creating new technologies that are ecofriendly. The transmission of sensory signals through cells to brain and vice versa and communication between the cells are known to have electrochemical origin. Electrochemistry, is therefore, a very vast and interdisciplinary subject. In this Unit, we will cover only some of its important elementary aspects.
(molar conductivity at zero concentration or infinite dilution); · enunciate Kohlrausch law and learn its applications; · understand quantitative aspects of electrolysis; · describe the construction of some primary and secondary batteries and fuel cells; · explain corrosion as an electrochemical process.
2.1 Electrochemical Cells
We had studied the construction and functioning of Daniell cell (Fig. 2.1). This cell converts the chemical energy liberated during the redox reaction (2.1) to electrical energy and has an electrical potential equal to 1.1 V when concentration of and ions is unity (1 mol dm)*. Such a device is called a galvanic or a voltaic cell. If an external opposite potential is applied in the galvanic cell [Fig. 2.2(a)] and increased slowly, we find that the reaction continues to take place till the opposing voltage reaches the value 1.1 V [Fig. 2.2(b)] when, the reaction stops altogether and no current flows through the cell. Any further increase in the external potential again starts the reaction but in the opposite direction [Fig. 2.2(c)]. It now functions as an electrolytic cell, a device for using electrical energy to carry non-spontaneous chemical reactions. Both types of cells are quite important and we shall study some of their salient features in the following pages.
*Strictly speaking activity should be used instead of concentration. It is directly proportional to concentration. In dilute solutions, it is equal to concentration. You will study more about it in higher classes.
2.2 Galvanic Cells
As mentioned earlier a galvanic cell is an electrochemical cell that converts the chemical energy of a spontaneous redox reaction into electrical energy. In this device the Gibbs energy of the spontaneous redox reaction is converted into electrical work which may be used for running a motor or other electrical gadgets like heater, fan, geyser, etc. Daniell cell discussed earlier is one such cell in which the following redox reaction occurs. This reaction is a combination of two half reactions whose addition gives the overall cell reaction: (i) (reduction half reaction) (2.2) (ii) (oxidation half reaction) (2.3)
These reactions occur in two different portions of the Daniell cell. The reduction half reaction occurs on the copper electrode while the oxidation half reaction occurs on the zinc electrode. These two portions of the cell are also called half-cells or redox couples. The copper electrode may be called the reduction half cell and the zinc electrode, the oxidation half-cell. We can construct innumerable number of galvanic cells on the pattern of Daniell cell by taking combinations of different half-cells. Each half-cell consists of a metallic electrode dipped into an electrolyte. The two half-cells are connected by a metallic wire through a voltmeter and a switch externally. The electrolytes of the two half-cells are connected internally through a salt bridge as shown in Fig. 2.1. Sometimes, both the electrodes dip in the same electrolyte solution and in such cases we do not require a salt bridge. At each electrode-electrolyte interface there is a tendency of metal ions from the solution to deposit on the metal electrode trying to make it positively charged. At the same time, metal atoms of the electrode have a tendency to go into the solution as ions and leave behind the electrons at the electrode trying to make it negatively charged. At equilibrium, there is a separation of charges and depending on the tendencies of the two opposing reactions, the electrode may be positively or negatively charged with respect to the solution. A potential difference develops between the electrode and the electrolyte which is called electrode potential. When the concentrations of all the species involved in a half-cell is unity then the electrode potential is known as standard electrode potential. According to IUPAC convention, standard reduction potentials are now called standard electrode potentials. In a galvanic cell, the half-cell in which oxidation takes place is called anode and it has a negative potential with respect to the solution. The other half-cell in which reduction takes place is called cathode and it has a positive potential with respect to the solution. Thus, there exists a potential difference between the two electrodes and as soon as the switch is in the on position the electrons flow from negative electrode to positive electrode. The direction of current flow is opposite to that of electron flow.
The potential difference between the two electrodes of a galvanic cell is called the cell potential and is measured in volts. The cell potential is the difference between the electrode potentials (reduction potentials) of the cathode and anode. It is called the cell electromotive force (emf) of the cell when no current is drawn through the cell. It is now an accepted convention that we keep the anode on the left and the cathode on the right while representing the galvanic cell. A galvanic cell is generally represented by putting a vertical line between metal and electrolyte solution and putting a double vertical line between the two electrolytes connected by a salt bridge. Under this convention the emf of the cell is positive and is given by the potential of the half-cell on the right hand side minus the potential of the half-cell on the left hand side i.e., This is illustrated by the following example:
Open the app to read all 19 Chemistry chapters free
You're reading a free preview of Electrochemistry. Get every PYQ-marked NCERT line, all chapters, in the MedicNEET app — free.
Open in the MedicNEET app